Adding xkb-data as recommended for lxpanel.
[debian/lxpanel.git] / Makefile.in
1 # Makefile.in generated by automake 1.14.1 from Makefile.am.
2 # @configure_input@
3
4 # Copyright (C) 1994-2013 Free Software Foundation, Inc.
5
6 # This Makefile.in is free software; the Free Software Foundation
7 # gives unlimited permission to copy and/or distribute it,
8 # with or without modifications, as long as this notice is preserved.
9
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13 # PARTICULAR PURPOSE.
14
15 @SET_MAKE@
16
17 VPATH = @srcdir@
18 am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
19 am__make_running_with_option = \
20 case $${target_option-} in \
21 ?) ;; \
22 *) echo "am__make_running_with_option: internal error: invalid" \
23 "target option '$${target_option-}' specified" >&2; \
24 exit 1;; \
25 esac; \
26 has_opt=no; \
27 sane_makeflags=$$MAKEFLAGS; \
28 if $(am__is_gnu_make); then \
29 sane_makeflags=$$MFLAGS; \
30 else \
31 case $$MAKEFLAGS in \
32 *\\[\ \ ]*) \
33 bs=\\; \
34 sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
35 | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
36 esac; \
37 fi; \
38 skip_next=no; \
39 strip_trailopt () \
40 { \
41 flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
42 }; \
43 for flg in $$sane_makeflags; do \
44 test $$skip_next = yes && { skip_next=no; continue; }; \
45 case $$flg in \
46 *=*|--*) continue;; \
47 -*I) strip_trailopt 'I'; skip_next=yes;; \
48 -*I?*) strip_trailopt 'I';; \
49 -*O) strip_trailopt 'O'; skip_next=yes;; \
50 -*O?*) strip_trailopt 'O';; \
51 -*l) strip_trailopt 'l'; skip_next=yes;; \
52 -*l?*) strip_trailopt 'l';; \
53 -[dEDm]) skip_next=yes;; \
54 -[JT]) skip_next=yes;; \
55 esac; \
56 case $$flg in \
57 *$$target_option*) has_opt=yes; break;; \
58 esac; \
59 done; \
60 test $$has_opt = yes
61 am__make_dryrun = (target_option=n; $(am__make_running_with_option))
62 am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
63 pkgdatadir = $(datadir)/@PACKAGE@
64 pkgincludedir = $(includedir)/@PACKAGE@
65 pkglibdir = $(libdir)/@PACKAGE@
66 pkglibexecdir = $(libexecdir)/@PACKAGE@
67 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
68 install_sh_DATA = $(install_sh) -c -m 644
69 install_sh_PROGRAM = $(install_sh) -c
70 install_sh_SCRIPT = $(install_sh) -c
71 INSTALL_HEADER = $(INSTALL_DATA)
72 transform = $(program_transform_name)
73 NORMAL_INSTALL = :
74 PRE_INSTALL = :
75 POST_INSTALL = :
76 NORMAL_UNINSTALL = :
77 PRE_UNINSTALL = :
78 POST_UNINSTALL = :
79 build_triplet = @build@
80 host_triplet = @host@
81 subdir = .
82 DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
83 $(top_srcdir)/configure $(am__configure_deps) \
84 $(srcdir)/config.h.in mkinstalldirs $(srcdir)/lxpanel.pc.in \
85 $(top_srcdir)/data/default/panels/panel.in \
86 $(top_srcdir)/data/two_panels/panels/top.in \
87 $(top_srcdir)/data/two_panels/panels/bottom.in ABOUT-NLS \
88 AUTHORS COPYING ChangeLog README ar-lib compile config.guess \
89 config.rpath config.sub depcomp install-sh missing ltmain.sh
90 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
91 am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
92 $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intltool.m4 \
93 $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
94 $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \
95 $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
96 $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
97 $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
98 $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
99 $(top_srcdir)/configure.ac
100 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
101 $(ACLOCAL_M4)
102 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
103 configure.lineno config.status.lineno
104 mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
105 CONFIG_HEADER = config.h
106 CONFIG_CLEAN_FILES = lxpanel.pc data/default/panels/panel \
107 data/two_panels/panels/top data/two_panels/panels/bottom
108 CONFIG_CLEAN_VPATH_FILES =
109 AM_V_P = $(am__v_P_@AM_V@)
110 am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
111 am__v_P_0 = false
112 am__v_P_1 = :
113 AM_V_GEN = $(am__v_GEN_@AM_V@)
114 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
115 am__v_GEN_0 = @echo " GEN " $@;
116 am__v_GEN_1 =
117 AM_V_at = $(am__v_at_@AM_V@)
118 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
119 am__v_at_0 = @
120 am__v_at_1 =
121 SOURCES =
122 DIST_SOURCES =
123 RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
124 ctags-recursive dvi-recursive html-recursive info-recursive \
125 install-data-recursive install-dvi-recursive \
126 install-exec-recursive install-html-recursive \
127 install-info-recursive install-pdf-recursive \
128 install-ps-recursive install-recursive installcheck-recursive \
129 installdirs-recursive pdf-recursive ps-recursive \
130 tags-recursive uninstall-recursive
131 am__can_run_installinfo = \
132 case $$AM_UPDATE_INFO_DIR in \
133 n|no|NO) false;; \
134 *) (install-info --version) >/dev/null 2>&1;; \
135 esac
136 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
137 am__vpath_adj = case $$p in \
138 $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
139 *) f=$$p;; \
140 esac;
141 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
142 am__install_max = 40
143 am__nobase_strip_setup = \
144 srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
145 am__nobase_strip = \
146 for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
147 am__nobase_list = $(am__nobase_strip_setup); \
148 for p in $$list; do echo "$$p $$p"; done | \
149 sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
150 $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
151 if (++n[$$2] == $(am__install_max)) \
152 { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
153 END { for (dir in files) print dir, files[dir] }'
154 am__base_list = \
155 sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
156 sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
157 am__uninstall_files_from_dir = { \
158 test -z "$$files" \
159 || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
160 || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
161 $(am__cd) "$$dir" && rm -f $$files; }; \
162 }
163 am__installdirs = "$(DESTDIR)$(pkgconfigdir)"
164 DATA = $(pkgconfig_DATA)
165 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
166 distclean-recursive maintainer-clean-recursive
167 am__recursive_targets = \
168 $(RECURSIVE_TARGETS) \
169 $(RECURSIVE_CLEAN_TARGETS) \
170 $(am__extra_recursive_targets)
171 AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
172 cscope distdir dist dist-all distcheck
173 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
174 $(LISP)config.h.in
175 # Read a list of newline-separated strings from the standard input,
176 # and print each of them once, without duplicates. Input order is
177 # *not* preserved.
178 am__uniquify_input = $(AWK) '\
179 BEGIN { nonempty = 0; } \
180 { items[$$0] = 1; nonempty = 1; } \
181 END { if (nonempty) { for (i in items) print i; }; } \
182 '
183 # Make sure the list of sources is unique. This is necessary because,
184 # e.g., the same source file might be shared among _SOURCES variables
185 # for different programs/libraries.
186 am__define_uniq_tagged_files = \
187 list='$(am__tagged_files)'; \
188 unique=`for i in $$list; do \
189 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
190 done | $(am__uniquify_input)`
191 ETAGS = etags
192 CTAGS = ctags
193 CSCOPE = cscope
194 DIST_SUBDIRS = $(SUBDIRS)
195 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
196 distdir = $(PACKAGE)-$(VERSION)
197 top_distdir = $(distdir)
198 am__remove_distdir = \
199 if test -d "$(distdir)"; then \
200 find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
201 && rm -rf "$(distdir)" \
202 || { sleep 5 && rm -rf "$(distdir)"; }; \
203 else :; fi
204 am__post_remove_distdir = $(am__remove_distdir)
205 am__relativize = \
206 dir0=`pwd`; \
207 sed_first='s,^\([^/]*\)/.*$$,\1,'; \
208 sed_rest='s,^[^/]*/*,,'; \
209 sed_last='s,^.*/\([^/]*\)$$,\1,'; \
210 sed_butlast='s,/*[^/]*$$,,'; \
211 while test -n "$$dir1"; do \
212 first=`echo "$$dir1" | sed -e "$$sed_first"`; \
213 if test "$$first" != "."; then \
214 if test "$$first" = ".."; then \
215 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
216 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
217 else \
218 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
219 if test "$$first2" = "$$first"; then \
220 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
221 else \
222 dir2="../$$dir2"; \
223 fi; \
224 dir0="$$dir0"/"$$first"; \
225 fi; \
226 fi; \
227 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
228 done; \
229 reldir="$$dir2"
230 GZIP_ENV = --best
231 DIST_ARCHIVES = $(distdir).tar.xz
232 DIST_TARGETS = dist-xz
233 distuninstallcheck_listfiles = find . -type f -print
234 am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
235 | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
236 distcleancheck_listfiles = find . -type f -print
237 ACLOCAL = @ACLOCAL@
238 ADDITIONAL_FLAGS = @ADDITIONAL_FLAGS@
239 ALL_LINGUAS = @ALL_LINGUAS@
240 ALL_PLUGINS_LIST = @ALL_PLUGINS_LIST@
241 AMTAR = @AMTAR@
242 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
243 APPLET_CFLAGS = @APPLET_CFLAGS@
244 APPLET_LIBS = @APPLET_LIBS@
245 AR = @AR@
246 AUTOCONF = @AUTOCONF@
247 AUTOHEADER = @AUTOHEADER@
248 AUTOMAKE = @AUTOMAKE@
249 AWK = @AWK@
250 CATALOGS = @CATALOGS@
251 CATOBJEXT = @CATOBJEXT@
252 CC = @CC@
253 CCDEPMODE = @CCDEPMODE@
254 CFLAGS = @CFLAGS@
255 CPP = @CPP@
256 CPPFLAGS = @CPPFLAGS@
257 CYGPATH_W = @CYGPATH_W@
258 DATADIRNAME = @DATADIRNAME@
259 DEFS = @DEFS@
260 DEPDIR = @DEPDIR@
261 DLLTOOL = @DLLTOOL@
262 DSYMUTIL = @DSYMUTIL@
263 DUMPBIN = @DUMPBIN@
264 ECHO_C = @ECHO_C@
265 ECHO_N = @ECHO_N@
266 ECHO_T = @ECHO_T@
267 EGREP = @EGREP@
268 EXEEXT = @EXEEXT@
269 FGREP = @FGREP@
270 GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
271 GMOFILES = @GMOFILES@
272 GMSGFMT = @GMSGFMT@
273 GREP = @GREP@
274 INDICATORDIR = @INDICATORDIR@
275 INDICATORICONSDIR = @INDICATORICONSDIR@
276 INSTALL = @INSTALL@
277 INSTALL_DATA = @INSTALL_DATA@
278 INSTALL_PROGRAM = @INSTALL_PROGRAM@
279 INSTALL_SCRIPT = @INSTALL_SCRIPT@
280 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
281 INSTOBJEXT = @INSTOBJEXT@
282 INTLLIBS = @INTLLIBS@
283 INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@
284 INTLTOOL_MERGE = @INTLTOOL_MERGE@
285 INTLTOOL_PERL = @INTLTOOL_PERL@
286 INTLTOOL_UPDATE = @INTLTOOL_UPDATE@
287 INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@
288 INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@
289 INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@
290 INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@
291 LD = @LD@
292 LDFLAGS = @LDFLAGS@
293 LIBICONV = @LIBICONV@
294 LIBINTL = @LIBINTL@
295 LIBOBJS = @LIBOBJS@
296 LIBS = @LIBS@
297 LIBTOOL = @LIBTOOL@
298 LIBXML2_CFLAGS = @LIBXML2_CFLAGS@
299 LIBXML2_LIBS = @LIBXML2_LIBS@
300 LIPO = @LIPO@
301 LN_S = @LN_S@
302 LTLIBICONV = @LTLIBICONV@
303 LTLIBINTL = @LTLIBINTL@
304 LTLIBOBJS = @LTLIBOBJS@
305 LXPANEL_MODULE = @LXPANEL_MODULE@
306 MAKEINFO = @MAKEINFO@
307 MANIFEST_TOOL = @MANIFEST_TOOL@
308 MENU_CACHE_CFLAGS = @MENU_CACHE_CFLAGS@
309 MENU_CACHE_LIBS = @MENU_CACHE_LIBS@
310 MKDIR_P = @MKDIR_P@
311 MKINSTALLDIRS = @MKINSTALLDIRS@
312 MSGFMT = @MSGFMT@
313 MSGFMT_OPTS = @MSGFMT_OPTS@
314 MSGMERGE = @MSGMERGE@
315 NM = @NM@
316 NMEDIT = @NMEDIT@
317 OBJDUMP = @OBJDUMP@
318 OBJEXT = @OBJEXT@
319 OTOOL = @OTOOL@
320 OTOOL64 = @OTOOL64@
321 PACKAGE = @PACKAGE@
322 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
323 PACKAGE_CFLAGS = @PACKAGE_CFLAGS@
324 PACKAGE_LIBS = @PACKAGE_LIBS@
325 PACKAGE_NAME = @PACKAGE_NAME@
326 PACKAGE_STRING = @PACKAGE_STRING@
327 PACKAGE_TARNAME = @PACKAGE_TARNAME@
328 PACKAGE_URL = @PACKAGE_URL@
329 PACKAGE_VERSION = @PACKAGE_VERSION@
330 PATH_SEPARATOR = @PATH_SEPARATOR@
331 PKG_CONFIG = @PKG_CONFIG@
332 PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
333 PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
334 PLUGINS_LIST = @PLUGINS_LIST@
335 POFILES = @POFILES@
336 POSUB = @POSUB@
337 PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@
338 PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@
339 RANLIB = @RANLIB@
340 SED = @SED@
341 SET_MAKE = @SET_MAKE@
342 SHELL = @SHELL@
343 STRIP = @STRIP@
344 USE_NLS = @USE_NLS@
345 VERSION = @VERSION@
346 X11_CFLAGS = @X11_CFLAGS@
347 X11_LIBS = @X11_LIBS@
348 XGETTEXT = @XGETTEXT@
349 XMKMF = @XMKMF@
350 XMLCATALOG = @XMLCATALOG@
351 XML_CATALOG_FILE = @XML_CATALOG_FILE@
352 XSLTPROC = @XSLTPROC@
353 abs_builddir = @abs_builddir@
354 abs_srcdir = @abs_srcdir@
355 abs_top_builddir = @abs_top_builddir@
356 abs_top_srcdir = @abs_top_srcdir@
357 ac_ct_AR = @ac_ct_AR@
358 ac_ct_CC = @ac_ct_CC@
359 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
360 am__include = @am__include@
361 am__leading_dot = @am__leading_dot@
362 am__quote = @am__quote@
363 am__tar = @am__tar@
364 am__untar = @am__untar@
365 bindir = @bindir@
366 build = @build@
367 build_alias = @build_alias@
368 build_cpu = @build_cpu@
369 build_os = @build_os@
370 build_vendor = @build_vendor@
371 builddir = @builddir@
372 datadir = @datadir@
373 datarootdir = @datarootdir@
374 docdir = @docdir@
375 dvidir = @dvidir@
376 exec_prefix = @exec_prefix@
377 host = @host@
378 host_alias = @host_alias@
379 host_cpu = @host_cpu@
380 host_os = @host_os@
381 host_vendor = @host_vendor@
382 htmldir = @htmldir@
383 includedir = @includedir@
384 infodir = @infodir@
385 install_sh = @install_sh@
386 intltool__v_merge_options_ = @intltool__v_merge_options_@
387 intltool__v_merge_options_0 = @intltool__v_merge_options_0@
388 libdir = @libdir@
389 libexecdir = @libexecdir@
390 localedir = @localedir@
391 localstatedir = @localstatedir@
392 mandir = @mandir@
393 mkdir_p = @mkdir_p@
394 oldincludedir = @oldincludedir@
395 pdfdir = @pdfdir@
396 prefix = @prefix@
397 program_transform_name = @program_transform_name@
398 psdir = @psdir@
399 sbindir = @sbindir@
400 sharedstatedir = @sharedstatedir@
401 srcdir = @srcdir@
402 sysconfdir = @sysconfdir@
403 target_alias = @target_alias@
404 top_build_prefix = @top_build_prefix@
405 top_builddir = @top_builddir@
406 top_srcdir = @top_srcdir@
407 ACLOCAL_AMFLAGS = -I m4
408 SUBDIRS = plugins src data po man
409 EXTRA_DIST = \
410 autogen.sh \
411 intltool-extract.in \
412 intltool-merge.in \
413 intltool-update.in \
414 lxpanel.pc.in
415
416 pkgconfigdir = $(libdir)/pkgconfig
417 pkgconfig_DATA = lxpanel.pc
418 all: config.h
419 $(MAKE) $(AM_MAKEFLAGS) all-recursive
420
421 .SUFFIXES:
422 am--refresh: Makefile
423 @:
424 $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
425 @for dep in $?; do \
426 case '$(am__configure_deps)' in \
427 *$$dep*) \
428 echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
429 $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
430 && exit 0; \
431 exit 1;; \
432 esac; \
433 done; \
434 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
435 $(am__cd) $(top_srcdir) && \
436 $(AUTOMAKE) --foreign Makefile
437 .PRECIOUS: Makefile
438 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
439 @case '$?' in \
440 *config.status*) \
441 echo ' $(SHELL) ./config.status'; \
442 $(SHELL) ./config.status;; \
443 *) \
444 echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
445 cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
446 esac;
447
448 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
449 $(SHELL) ./config.status --recheck
450
451 $(top_srcdir)/configure: $(am__configure_deps)
452 $(am__cd) $(srcdir) && $(AUTOCONF)
453 $(ACLOCAL_M4): $(am__aclocal_m4_deps)
454 $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
455 $(am__aclocal_m4_deps):
456
457 config.h: stamp-h1
458 @test -f $@ || rm -f stamp-h1
459 @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
460
461 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
462 @rm -f stamp-h1
463 cd $(top_builddir) && $(SHELL) ./config.status config.h
464 $(srcdir)/config.h.in: $(am__configure_deps)
465 ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
466 rm -f stamp-h1
467 touch $@
468
469 distclean-hdr:
470 -rm -f config.h stamp-h1
471 lxpanel.pc: $(top_builddir)/config.status $(srcdir)/lxpanel.pc.in
472 cd $(top_builddir) && $(SHELL) ./config.status $@
473 data/default/panels/panel: $(top_builddir)/config.status $(top_srcdir)/data/default/panels/panel.in
474 cd $(top_builddir) && $(SHELL) ./config.status $@
475 data/two_panels/panels/top: $(top_builddir)/config.status $(top_srcdir)/data/two_panels/panels/top.in
476 cd $(top_builddir) && $(SHELL) ./config.status $@
477 data/two_panels/panels/bottom: $(top_builddir)/config.status $(top_srcdir)/data/two_panels/panels/bottom.in
478 cd $(top_builddir) && $(SHELL) ./config.status $@
479
480 mostlyclean-libtool:
481 -rm -f *.lo
482
483 clean-libtool:
484 -rm -rf .libs _libs
485
486 distclean-libtool:
487 -rm -f libtool config.lt
488 install-pkgconfigDATA: $(pkgconfig_DATA)
489 @$(NORMAL_INSTALL)
490 @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
491 if test -n "$$list"; then \
492 echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
493 $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
494 fi; \
495 for p in $$list; do \
496 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
497 echo "$$d$$p"; \
498 done | $(am__base_list) | \
499 while read files; do \
500 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
501 $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
502 done
503
504 uninstall-pkgconfigDATA:
505 @$(NORMAL_UNINSTALL)
506 @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
507 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
508 dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
509
510 # This directory's subdirectories are mostly independent; you can cd
511 # into them and run 'make' without going through this Makefile.
512 # To change the values of 'make' variables: instead of editing Makefiles,
513 # (1) if the variable is set in 'config.status', edit 'config.status'
514 # (which will cause the Makefiles to be regenerated when you run 'make');
515 # (2) otherwise, pass the desired values on the 'make' command line.
516 $(am__recursive_targets):
517 @fail=; \
518 if $(am__make_keepgoing); then \
519 failcom='fail=yes'; \
520 else \
521 failcom='exit 1'; \
522 fi; \
523 dot_seen=no; \
524 target=`echo $@ | sed s/-recursive//`; \
525 case "$@" in \
526 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
527 *) list='$(SUBDIRS)' ;; \
528 esac; \
529 for subdir in $$list; do \
530 echo "Making $$target in $$subdir"; \
531 if test "$$subdir" = "."; then \
532 dot_seen=yes; \
533 local_target="$$target-am"; \
534 else \
535 local_target="$$target"; \
536 fi; \
537 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
538 || eval $$failcom; \
539 done; \
540 if test "$$dot_seen" = "no"; then \
541 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
542 fi; test -z "$$fail"
543
544 ID: $(am__tagged_files)
545 $(am__define_uniq_tagged_files); mkid -fID $$unique
546 tags: tags-recursive
547 TAGS: tags
548
549 tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
550 set x; \
551 here=`pwd`; \
552 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
553 include_option=--etags-include; \
554 empty_fix=.; \
555 else \
556 include_option=--include; \
557 empty_fix=; \
558 fi; \
559 list='$(SUBDIRS)'; for subdir in $$list; do \
560 if test "$$subdir" = .; then :; else \
561 test ! -f $$subdir/TAGS || \
562 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
563 fi; \
564 done; \
565 $(am__define_uniq_tagged_files); \
566 shift; \
567 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
568 test -n "$$unique" || unique=$$empty_fix; \
569 if test $$# -gt 0; then \
570 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
571 "$$@" $$unique; \
572 else \
573 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
574 $$unique; \
575 fi; \
576 fi
577 ctags: ctags-recursive
578
579 CTAGS: ctags
580 ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
581 $(am__define_uniq_tagged_files); \
582 test -z "$(CTAGS_ARGS)$$unique" \
583 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
584 $$unique
585
586 GTAGS:
587 here=`$(am__cd) $(top_builddir) && pwd` \
588 && $(am__cd) $(top_srcdir) \
589 && gtags -i $(GTAGS_ARGS) "$$here"
590 cscope: cscope.files
591 test ! -s cscope.files \
592 || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
593 clean-cscope:
594 -rm -f cscope.files
595 cscope.files: clean-cscope cscopelist
596 cscopelist: cscopelist-recursive
597
598 cscopelist-am: $(am__tagged_files)
599 list='$(am__tagged_files)'; \
600 case "$(srcdir)" in \
601 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
602 *) sdir=$(subdir)/$(srcdir) ;; \
603 esac; \
604 for i in $$list; do \
605 if test -f "$$i"; then \
606 echo "$(subdir)/$$i"; \
607 else \
608 echo "$$sdir/$$i"; \
609 fi; \
610 done >> $(top_builddir)/cscope.files
611
612 distclean-tags:
613 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
614 -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
615
616 distdir: $(DISTFILES)
617 $(am__remove_distdir)
618 test -d "$(distdir)" || mkdir "$(distdir)"
619 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
620 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
621 list='$(DISTFILES)'; \
622 dist_files=`for file in $$list; do echo $$file; done | \
623 sed -e "s|^$$srcdirstrip/||;t" \
624 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
625 case $$dist_files in \
626 */*) $(MKDIR_P) `echo "$$dist_files" | \
627 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
628 sort -u` ;; \
629 esac; \
630 for file in $$dist_files; do \
631 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
632 if test -d $$d/$$file; then \
633 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
634 if test -d "$(distdir)/$$file"; then \
635 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
636 fi; \
637 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
638 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
639 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
640 fi; \
641 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
642 else \
643 test -f "$(distdir)/$$file" \
644 || cp -p $$d/$$file "$(distdir)/$$file" \
645 || exit 1; \
646 fi; \
647 done
648 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
649 if test "$$subdir" = .; then :; else \
650 $(am__make_dryrun) \
651 || test -d "$(distdir)/$$subdir" \
652 || $(MKDIR_P) "$(distdir)/$$subdir" \
653 || exit 1; \
654 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
655 $(am__relativize); \
656 new_distdir=$$reldir; \
657 dir1=$$subdir; dir2="$(top_distdir)"; \
658 $(am__relativize); \
659 new_top_distdir=$$reldir; \
660 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
661 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
662 ($(am__cd) $$subdir && \
663 $(MAKE) $(AM_MAKEFLAGS) \
664 top_distdir="$$new_top_distdir" \
665 distdir="$$new_distdir" \
666 am__remove_distdir=: \
667 am__skip_length_check=: \
668 am__skip_mode_fix=: \
669 distdir) \
670 || exit 1; \
671 fi; \
672 done
673 $(MAKE) $(AM_MAKEFLAGS) \
674 top_distdir="$(top_distdir)" distdir="$(distdir)" \
675 dist-hook
676 -test -n "$(am__skip_mode_fix)" \
677 || find "$(distdir)" -type d ! -perm -755 \
678 -exec chmod u+rwx,go+rx {} \; -o \
679 ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
680 ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
681 ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
682 || chmod -R a+r "$(distdir)"
683 dist-gzip: distdir
684 tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
685 $(am__post_remove_distdir)
686
687 dist-bzip2: distdir
688 tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
689 $(am__post_remove_distdir)
690
691 dist-lzip: distdir
692 tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
693 $(am__post_remove_distdir)
694 dist-xz: distdir
695 tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
696 $(am__post_remove_distdir)
697
698 dist-tarZ: distdir
699 @echo WARNING: "Support for shar distribution archives is" \
700 "deprecated." >&2
701 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
702 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
703 $(am__post_remove_distdir)
704
705 dist-shar: distdir
706 @echo WARNING: "Support for distribution archives compressed with" \
707 "legacy program 'compress' is deprecated." >&2
708 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
709 shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
710 $(am__post_remove_distdir)
711
712 dist-zip: distdir
713 -rm -f $(distdir).zip
714 zip -rq $(distdir).zip $(distdir)
715 $(am__post_remove_distdir)
716
717 dist dist-all:
718 $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
719 $(am__post_remove_distdir)
720
721 # This target untars the dist file and tries a VPATH configuration. Then
722 # it guarantees that the distribution is self-contained by making another
723 # tarfile.
724 distcheck: dist
725 case '$(DIST_ARCHIVES)' in \
726 *.tar.gz*) \
727 GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
728 *.tar.bz2*) \
729 bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
730 *.tar.lz*) \
731 lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
732 *.tar.xz*) \
733 xz -dc $(distdir).tar.xz | $(am__untar) ;;\
734 *.tar.Z*) \
735 uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
736 *.shar.gz*) \
737 GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
738 *.zip*) \
739 unzip $(distdir).zip ;;\
740 esac
741 chmod -R a-w $(distdir)
742 chmod u+w $(distdir)
743 mkdir $(distdir)/_build $(distdir)/_inst
744 chmod a-w $(distdir)
745 test -d $(distdir)/_build || exit 0; \
746 dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
747 && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
748 && am__cwd=`pwd` \
749 && $(am__cd) $(distdir)/_build \
750 && ../configure \
751 $(AM_DISTCHECK_CONFIGURE_FLAGS) \
752 $(DISTCHECK_CONFIGURE_FLAGS) \
753 --srcdir=.. --prefix="$$dc_install_base" \
754 && $(MAKE) $(AM_MAKEFLAGS) \
755 && $(MAKE) $(AM_MAKEFLAGS) dvi \
756 && $(MAKE) $(AM_MAKEFLAGS) check \
757 && $(MAKE) $(AM_MAKEFLAGS) install \
758 && $(MAKE) $(AM_MAKEFLAGS) installcheck \
759 && $(MAKE) $(AM_MAKEFLAGS) uninstall \
760 && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
761 distuninstallcheck \
762 && chmod -R a-w "$$dc_install_base" \
763 && ({ \
764 (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
765 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
766 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
767 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
768 distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
769 } || { rm -rf "$$dc_destdir"; exit 1; }) \
770 && rm -rf "$$dc_destdir" \
771 && $(MAKE) $(AM_MAKEFLAGS) dist \
772 && rm -rf $(DIST_ARCHIVES) \
773 && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
774 && cd "$$am__cwd" \
775 || exit 1
776 $(am__post_remove_distdir)
777 @(echo "$(distdir) archives ready for distribution: "; \
778 list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
779 sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
780 distuninstallcheck:
781 @test -n '$(distuninstallcheck_dir)' || { \
782 echo 'ERROR: trying to run $@ with an empty' \
783 '$$(distuninstallcheck_dir)' >&2; \
784 exit 1; \
785 }; \
786 $(am__cd) '$(distuninstallcheck_dir)' || { \
787 echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
788 exit 1; \
789 }; \
790 test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
791 || { echo "ERROR: files left after uninstall:" ; \
792 if test -n "$(DESTDIR)"; then \
793 echo " (check DESTDIR support)"; \
794 fi ; \
795 $(distuninstallcheck_listfiles) ; \
796 exit 1; } >&2
797 distcleancheck: distclean
798 @if test '$(srcdir)' = . ; then \
799 echo "ERROR: distcleancheck can only run from a VPATH build" ; \
800 exit 1 ; \
801 fi
802 @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
803 || { echo "ERROR: files left in build directory after distclean:" ; \
804 $(distcleancheck_listfiles) ; \
805 exit 1; } >&2
806 check-am: all-am
807 check: check-recursive
808 all-am: Makefile $(DATA) config.h
809 installdirs: installdirs-recursive
810 installdirs-am:
811 for dir in "$(DESTDIR)$(pkgconfigdir)"; do \
812 test -z "$$dir" || $(MKDIR_P) "$$dir"; \
813 done
814 install: install-recursive
815 install-exec: install-exec-recursive
816 install-data: install-data-recursive
817 uninstall: uninstall-recursive
818
819 install-am: all-am
820 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
821
822 installcheck: installcheck-recursive
823 install-strip:
824 if test -z '$(STRIP)'; then \
825 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
826 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
827 install; \
828 else \
829 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
830 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
831 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
832 fi
833 mostlyclean-generic:
834
835 clean-generic:
836
837 distclean-generic:
838 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
839 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
840
841 maintainer-clean-generic:
842 @echo "This command is intended for maintainers to use"
843 @echo "it deletes files that may require special tools to rebuild."
844 clean: clean-recursive
845
846 clean-am: clean-generic clean-libtool mostlyclean-am
847
848 distclean: distclean-recursive
849 -rm -f $(am__CONFIG_DISTCLEAN_FILES)
850 -rm -f Makefile
851 distclean-am: clean-am distclean-generic distclean-hdr \
852 distclean-libtool distclean-tags
853
854 dvi: dvi-recursive
855
856 dvi-am:
857
858 html: html-recursive
859
860 html-am:
861
862 info: info-recursive
863
864 info-am:
865
866 install-data-am: install-data-local install-pkgconfigDATA
867
868 install-dvi: install-dvi-recursive
869
870 install-dvi-am:
871
872 install-exec-am:
873
874 install-html: install-html-recursive
875
876 install-html-am:
877
878 install-info: install-info-recursive
879
880 install-info-am:
881
882 install-man:
883
884 install-pdf: install-pdf-recursive
885
886 install-pdf-am:
887
888 install-ps: install-ps-recursive
889
890 install-ps-am:
891
892 installcheck-am:
893
894 maintainer-clean: maintainer-clean-recursive
895 -rm -f $(am__CONFIG_DISTCLEAN_FILES)
896 -rm -rf $(top_srcdir)/autom4te.cache
897 -rm -f Makefile
898 maintainer-clean-am: distclean-am maintainer-clean-generic
899
900 mostlyclean: mostlyclean-recursive
901
902 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
903
904 pdf: pdf-recursive
905
906 pdf-am:
907
908 ps: ps-recursive
909
910 ps-am:
911
912 uninstall-am: uninstall-pkgconfigDATA
913
914 .MAKE: $(am__recursive_targets) all install-am install-strip
915
916 .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
917 am--refresh check check-am clean clean-cscope clean-generic \
918 clean-libtool cscope cscopelist-am ctags ctags-am dist \
919 dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \
920 dist-tarZ dist-xz dist-zip distcheck distclean \
921 distclean-generic distclean-hdr distclean-libtool \
922 distclean-tags distcleancheck distdir distuninstallcheck dvi \
923 dvi-am html html-am info info-am install install-am \
924 install-data install-data-am install-data-local install-dvi \
925 install-dvi-am install-exec install-exec-am install-html \
926 install-html-am install-info install-info-am install-man \
927 install-pdf install-pdf-am install-pkgconfigDATA install-ps \
928 install-ps-am install-strip installcheck installcheck-am \
929 installdirs installdirs-am maintainer-clean \
930 maintainer-clean-generic mostlyclean mostlyclean-generic \
931 mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
932 uninstall-am uninstall-pkgconfigDATA
933
934
935 install-data-local:
936 @$(NORMAL_INSTALL)
937 if test -d $(srcdir)/pixmaps; then \
938 $(mkinstalldirs) $(DESTDIR)$(pkgdatadir)/pixmaps; \
939 for pixmap in $(srcdir)/pixmaps/*; do \
940 if test -f $$pixmap; then \
941 $(INSTALL_DATA) $$pixmap $(DESTDIR)$(pkgdatadir)/pixmaps; \
942 fi \
943 done \
944 fi
945
946 dist-hook:
947 if test -d pixmaps; then \
948 mkdir $(distdir)/pixmaps; \
949 for pixmap in pixmaps/*; do \
950 if test -f $$pixmap; then \
951 cp -p $$pixmap $(distdir)/pixmaps; \
952 fi \
953 done \
954 fi
955
956 # Tell versions [3.59,3.63) of GNU make to not export all variables.
957 # Otherwise a system limit (for SysV at least) may be exceeded.
958 .NOEXPORT: