Merging upstream version 0.5.3.
[debian/lxappearance.git] / data / Makefile.in
index c7946bb..845f152 100644 (file)
@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11.3 from Makefile.am.
+# Makefile.in generated by automake 1.14 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 @SET_MAKE@
 
 VPATH = @srcdir@
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \  ]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs  ]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -32,8 +76,10 @@ POST_INSTALL = :
 NORMAL_UNINSTALL = :
 PRE_UNINSTALL = :
 POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
 subdir = data
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
        $(srcdir)/lxappearance.pc.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
@@ -44,21 +90,33 @@ mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/config.h
 CONFIG_CLEAN_FILES = lxappearance.pc
 CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
 AM_V_GEN = $(am__v_GEN_@AM_V@)
 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN   " $@;
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
 AM_V_at = $(am__v_at_@AM_V@)
 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
 am__v_at_0 = @
+am__v_at_1 = 
 SOURCES =
 DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
-       html-recursive info-recursive install-data-recursive \
-       install-dvi-recursive install-exec-recursive \
-       install-html-recursive install-info-recursive \
-       install-pdf-recursive install-ps-recursive install-recursive \
-       installcheck-recursive installdirs-recursive pdf-recursive \
-       ps-recursive uninstall-recursive
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+       ctags-recursive dvi-recursive html-recursive info-recursive \
+       install-data-recursive install-dvi-recursive \
+       install-exec-recursive install-html-recursive \
+       install-info-recursive install-pdf-recursive \
+       install-ps-recursive install-recursive installcheck-recursive \
+       installdirs-recursive pdf-recursive ps-recursive \
+       tags-recursive uninstall-recursive
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
@@ -91,9 +149,29 @@ am__installdirs = "$(DESTDIR)$(desktopdir)" \
 DATA = $(desktop_DATA) $(pkgconfig_DATA)
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive        \
   distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
-       $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+am__recursive_targets = \
+  $(RECURSIVE_TARGETS) \
+  $(RECURSIVE_CLEAN_TARGETS) \
+  $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
        distdir
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
 ETAGS = etags
 CTAGS = ctags
 DIST_SUBDIRS = $(SUBDIRS)
@@ -128,6 +206,7 @@ ADDITIONAL_FLAGS = @ADDITIONAL_FLAGS@
 ALL_LINGUAS = @ALL_LINGUAS@
 AMTAR = @AMTAR@
 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
 AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
 AUTOMAKE = @AUTOMAKE@
@@ -145,11 +224,15 @@ DBUS_CFLAGS = @DBUS_CFLAGS@
 DBUS_LIBS = @DBUS_LIBS@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
+FGREP = @FGREP@
 GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
 GMODULE_CFLAGS = @GMODULE_CFLAGS@
 GMODULE_LIBS = @GMODULE_LIBS@
@@ -173,18 +256,27 @@ INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@
 INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@
 INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@
 INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@
+LD = @LD@
 LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
 MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
 MKDIR_P = @MKDIR_P@
 MKINSTALLDIRS = @MKINSTALLDIRS@
 MSGFMT = @MSGFMT@
 MSGFMT_OPTS = @MSGFMT_OPTS@
 MSGMERGE = @MSGMERGE@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
@@ -200,6 +292,8 @@ POFILES = @POFILES@
 POSUB = @POSUB@
 PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@
 PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@
+RANLIB = @RANLIB@
+SED = @SED@
 SET_MAKE = @SET_MAKE@
 SHELL = @SHELL@
 STRIP = @STRIP@
@@ -215,21 +309,31 @@ abs_builddir = @abs_builddir@
 abs_srcdir = @abs_srcdir@
 abs_top_builddir = @abs_top_builddir@
 abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
 ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
 am__tar = @am__tar@
 am__untar = @am__untar@
 bindir = @bindir@
+build = @build@
 build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
 builddir = @builddir@
 datadir = @datadir@
 datarootdir = @datarootdir@
 docdir = @docdir@
 dvidir = @dvidir@
 exec_prefix = @exec_prefix@
+host = @host@
 host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
 htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
@@ -275,7 +379,7 @@ EXTRA_DIST = \
 all: all-recursive
 
 .SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
        @for dep in $?; do \
          case '$(am__configure_deps)' in \
            *$$dep*) \
@@ -300,17 +404,26 @@ Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+$(top_srcdir)/configure:  $(am__configure_deps)
        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(am__aclocal_m4_deps):
 lxappearance.pc: $(top_builddir)/config.status $(srcdir)/lxappearance.pc.in
        cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+
+mostlyclean-libtool:
+       -rm -f *.lo
+
+clean-libtool:
+       -rm -rf .libs _libs
 install-desktopDATA: $(desktop_DATA)
        @$(NORMAL_INSTALL)
-       test -z "$(desktopdir)" || $(MKDIR_P) "$(DESTDIR)$(desktopdir)"
        @list='$(desktop_DATA)'; test -n "$(desktopdir)" || list=; \
+       if test -n "$$list"; then \
+         echo " $(MKDIR_P) '$(DESTDIR)$(desktopdir)'"; \
+         $(MKDIR_P) "$(DESTDIR)$(desktopdir)" || exit 1; \
+       fi; \
        for p in $$list; do \
          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
          echo "$$d$$p"; \
@@ -327,8 +440,11 @@ uninstall-desktopDATA:
        dir='$(DESTDIR)$(desktopdir)'; $(am__uninstall_files_from_dir)
 install-pkgconfigDATA: $(pkgconfig_DATA)
        @$(NORMAL_INSTALL)
-       test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
        @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+       if test -n "$$list"; then \
+         echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
+         $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
+       fi; \
        for p in $$list; do \
          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
          echo "$$d$$p"; \
@@ -345,22 +461,25 @@ uninstall-pkgconfigDATA:
        dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
 
 # This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
-       @fail= failcom='exit 1'; \
-       for f in x $$MAKEFLAGS; do \
-         case $$f in \
-           *=* | --[!k]*);; \
-           *k*) failcom='fail=yes';; \
-         esac; \
-       done; \
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+#     (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+       @fail=; \
+       if $(am__make_keepgoing); then \
+         failcom='fail=yes'; \
+       else \
+         failcom='exit 1'; \
+       fi; \
        dot_seen=no; \
        target=`echo $@ | sed s/-recursive//`; \
-       list='$(SUBDIRS)'; for subdir in $$list; do \
+       case "$@" in \
+         distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+         *) list='$(SUBDIRS)' ;; \
+       esac; \
+       for subdir in $$list; do \
          echo "Making $$target in $$subdir"; \
          if test "$$subdir" = "."; then \
            dot_seen=yes; \
@@ -375,57 +494,12 @@ $(RECURSIVE_TARGETS):
          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
        fi; test -z "$$fail"
 
-$(RECURSIVE_CLEAN_TARGETS):
-       @fail= failcom='exit 1'; \
-       for f in x $$MAKEFLAGS; do \
-         case $$f in \
-           *=* | --[!k]*);; \
-           *k*) failcom='fail=yes';; \
-         esac; \
-       done; \
-       dot_seen=no; \
-       case "$@" in \
-         distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-         *) list='$(SUBDIRS)' ;; \
-       esac; \
-       rev=''; for subdir in $$list; do \
-         if test "$$subdir" = "."; then :; else \
-           rev="$$subdir $$rev"; \
-         fi; \
-       done; \
-       rev="$$rev ."; \
-       target=`echo $@ | sed s/-recursive//`; \
-       for subdir in $$rev; do \
-         echo "Making $$target in $$subdir"; \
-         if test "$$subdir" = "."; then \
-           local_target="$$target-am"; \
-         else \
-           local_target="$$target"; \
-         fi; \
-         ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-         || eval $$failcom; \
-       done && test -z "$$fail"
-tags-recursive:
-       list='$(SUBDIRS)'; for subdir in $$list; do \
-         test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-       done
-ctags-recursive:
-       list='$(SUBDIRS)'; for subdir in $$list; do \
-         test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
-       done
+ID: $(am__tagged_files)
+       $(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
 
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-       list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-       unique=`for i in $$list; do \
-           if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-         done | \
-         $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-             END { if (nonempty) { for (i in files) print i; }; }'`; \
-       mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-               $(TAGS_FILES) $(LISP)
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
        set x; \
        here=`pwd`; \
        if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
@@ -441,12 +515,7 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
              set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
          fi; \
        done; \
-       list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-       unique=`for i in $$list; do \
-           if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-         done | \
-         $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-             END { if (nonempty) { for (i in files) print i; }; }'`; \
+       $(am__define_uniq_tagged_files); \
        shift; \
        if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
          test -n "$$unique" || unique=$$empty_fix; \
@@ -458,15 +527,11 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
              $$unique; \
          fi; \
        fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-               $(TAGS_FILES) $(LISP)
-       list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-       unique=`for i in $$list; do \
-           if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-         done | \
-         $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-             END { if (nonempty) { for (i in files) print i; }; }'`; \
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+       $(am__define_uniq_tagged_files); \
        test -z "$(CTAGS_ARGS)$$unique" \
          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
             $$unique
@@ -475,6 +540,21 @@ GTAGS:
        here=`$(am__cd) $(top_builddir) && pwd` \
          && $(am__cd) $(top_srcdir) \
          && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+       list='$(am__tagged_files)'; \
+       case "$(srcdir)" in \
+         [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+         *) sdir=$(subdir)/$(srcdir) ;; \
+       esac; \
+       for i in $$list; do \
+         if test -f "$$i"; then \
+           echo "$(subdir)/$$i"; \
+         else \
+           echo "$$sdir/$$i"; \
+         fi; \
+       done >> $(top_builddir)/cscope.files
 
 distclean-tags:
        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -511,13 +591,10 @@ distdir: $(DISTFILES)
        done
        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
          if test "$$subdir" = .; then :; else \
-           test -d "$(distdir)/$$subdir" \
-           || $(MKDIR_P) "$(distdir)/$$subdir" \
-           || exit 1; \
-         fi; \
-       done
-       @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-         if test "$$subdir" = .; then :; else \
+           $(am__make_dryrun) \
+             || test -d "$(distdir)/$$subdir" \
+             || $(MKDIR_P) "$(distdir)/$$subdir" \
+             || exit 1; \
            dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
            $(am__relativize); \
            new_distdir=$$reldir; \
@@ -577,7 +654,7 @@ maintainer-clean-generic:
        @echo "it deletes files that may require special tools to rebuild."
 clean: clean-recursive
 
-clean-am: clean-generic mostlyclean-am
+clean-am: clean-generic clean-libtool mostlyclean-am
 
 distclean: distclean-recursive
        -rm -f Makefile
@@ -629,7 +706,7 @@ maintainer-clean-am: distclean-am maintainer-clean-generic
 
 mostlyclean: mostlyclean-recursive
 
-mostlyclean-am: mostlyclean-generic
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
 
 pdf: pdf-recursive
 
@@ -641,22 +718,22 @@ ps-am:
 
 uninstall-am: uninstall-desktopDATA uninstall-pkgconfigDATA
 
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
-       install-am install-strip tags-recursive
-
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
-       all all-am check check-am clean clean-generic ctags \
-       ctags-recursive distclean distclean-generic distclean-tags \
-       distdir dvi dvi-am html html-am info info-am install \
-       install-am install-data install-data-am install-desktopDATA \
-       install-dvi install-dvi-am install-exec install-exec-am \
-       install-html install-html-am install-info install-info-am \
-       install-man install-pdf install-pdf-am install-pkgconfigDATA \
-       install-ps install-ps-am install-strip installcheck \
-       installcheck-am installdirs installdirs-am maintainer-clean \
-       maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
-       pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
-       uninstall-desktopDATA uninstall-pkgconfigDATA
+.MAKE: $(am__recursive_targets) install-am install-strip
+
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
+       check-am clean clean-generic clean-libtool cscopelist-am ctags \
+       ctags-am distclean distclean-generic distclean-libtool \
+       distclean-tags distdir dvi dvi-am html html-am info info-am \
+       install install-am install-data install-data-am \
+       install-desktopDATA install-dvi install-dvi-am install-exec \
+       install-exec-am install-html install-html-am install-info \
+       install-info-am install-man install-pdf install-pdf-am \
+       install-pkgconfigDATA install-ps install-ps-am install-strip \
+       installcheck installcheck-am installdirs installdirs-am \
+       maintainer-clean maintainer-clean-generic mostlyclean \
+       mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+       tags tags-am uninstall uninstall-am uninstall-desktopDATA \
+       uninstall-pkgconfigDATA
 
 @INTLTOOL_DESKTOP_RULE@