Adding upstream version 0.5.1.
[debian/lxappearance.git] / data / Makefile.in
1 # Makefile.in generated by automake 1.11.1 from Makefile.am.
2 # @configure_input@
3
4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
6 # Inc.
7 # This Makefile.in is free software; the Free Software Foundation
8 # gives unlimited permission to copy and/or distribute it,
9 # with or without modifications, as long as this notice is preserved.
10
11 # This program is distributed in the hope that it will be useful,
12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
14 # PARTICULAR PURPOSE.
15
16 @SET_MAKE@
17
18 VPATH = @srcdir@
19 pkgdatadir = $(datadir)/@PACKAGE@
20 pkgincludedir = $(includedir)/@PACKAGE@
21 pkglibdir = $(libdir)/@PACKAGE@
22 pkglibexecdir = $(libexecdir)/@PACKAGE@
23 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
24 install_sh_DATA = $(install_sh) -c -m 644
25 install_sh_PROGRAM = $(install_sh) -c
26 install_sh_SCRIPT = $(install_sh) -c
27 INSTALL_HEADER = $(INSTALL_DATA)
28 transform = $(program_transform_name)
29 NORMAL_INSTALL = :
30 PRE_INSTALL = :
31 POST_INSTALL = :
32 NORMAL_UNINSTALL = :
33 PRE_UNINSTALL = :
34 POST_UNINSTALL = :
35 subdir = data
36 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
37 $(srcdir)/lxappearance.pc.in
38 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
39 am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
40 $(top_srcdir)/configure.ac
41 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
42 $(ACLOCAL_M4)
43 mkinstalldirs = $(install_sh) -d
44 CONFIG_HEADER = $(top_builddir)/config.h
45 CONFIG_CLEAN_FILES = lxappearance.pc
46 CONFIG_CLEAN_VPATH_FILES =
47 AM_V_GEN = $(am__v_GEN_$(V))
48 am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
49 am__v_GEN_0 = @echo " GEN " $@;
50 AM_V_at = $(am__v_at_$(V))
51 am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
52 am__v_at_0 = @
53 SOURCES =
54 DIST_SOURCES =
55 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
56 html-recursive info-recursive install-data-recursive \
57 install-dvi-recursive install-exec-recursive \
58 install-html-recursive install-info-recursive \
59 install-pdf-recursive install-ps-recursive install-recursive \
60 installcheck-recursive installdirs-recursive pdf-recursive \
61 ps-recursive uninstall-recursive
62 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
63 am__vpath_adj = case $$p in \
64 $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
65 *) f=$$p;; \
66 esac;
67 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
68 am__install_max = 40
69 am__nobase_strip_setup = \
70 srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
71 am__nobase_strip = \
72 for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
73 am__nobase_list = $(am__nobase_strip_setup); \
74 for p in $$list; do echo "$$p $$p"; done | \
75 sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
76 $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
77 if (++n[$$2] == $(am__install_max)) \
78 { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
79 END { for (dir in files) print dir, files[dir] }'
80 am__base_list = \
81 sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
82 sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
83 am__installdirs = "$(DESTDIR)$(desktopdir)" \
84 "$(DESTDIR)$(pkgconfigdir)"
85 DATA = $(desktop_DATA) $(pkgconfig_DATA)
86 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
87 distclean-recursive maintainer-clean-recursive
88 AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
89 $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
90 distdir
91 ETAGS = etags
92 CTAGS = ctags
93 DIST_SUBDIRS = $(SUBDIRS)
94 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
95 am__relativize = \
96 dir0=`pwd`; \
97 sed_first='s,^\([^/]*\)/.*$$,\1,'; \
98 sed_rest='s,^[^/]*/*,,'; \
99 sed_last='s,^.*/\([^/]*\)$$,\1,'; \
100 sed_butlast='s,/*[^/]*$$,,'; \
101 while test -n "$$dir1"; do \
102 first=`echo "$$dir1" | sed -e "$$sed_first"`; \
103 if test "$$first" != "."; then \
104 if test "$$first" = ".."; then \
105 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
106 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
107 else \
108 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
109 if test "$$first2" = "$$first"; then \
110 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
111 else \
112 dir2="../$$dir2"; \
113 fi; \
114 dir0="$$dir0"/"$$first"; \
115 fi; \
116 fi; \
117 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
118 done; \
119 reldir="$$dir2"
120 ACLOCAL = @ACLOCAL@
121 ADDITIONAL_FLAGS = @ADDITIONAL_FLAGS@
122 ALL_LINGUAS = @ALL_LINGUAS@
123 AMTAR = @AMTAR@
124 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
125 AUTOCONF = @AUTOCONF@
126 AUTOHEADER = @AUTOHEADER@
127 AUTOMAKE = @AUTOMAKE@
128 AWK = @AWK@
129 CATALOGS = @CATALOGS@
130 CATOBJEXT = @CATOBJEXT@
131 CC = @CC@
132 CCDEPMODE = @CCDEPMODE@
133 CFLAGS = @CFLAGS@
134 CPP = @CPP@
135 CPPFLAGS = @CPPFLAGS@
136 CYGPATH_W = @CYGPATH_W@
137 DATADIRNAME = @DATADIRNAME@
138 DEFS = @DEFS@
139 DEPDIR = @DEPDIR@
140 ECHO_C = @ECHO_C@
141 ECHO_N = @ECHO_N@
142 ECHO_T = @ECHO_T@
143 EGREP = @EGREP@
144 EXEEXT = @EXEEXT@
145 GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
146 GMODULE_CFLAGS = @GMODULE_CFLAGS@
147 GMODULE_LIBS = @GMODULE_LIBS@
148 GMOFILES = @GMOFILES@
149 GMSGFMT = @GMSGFMT@
150 GREP = @GREP@
151 GTK_CFLAGS = @GTK_CFLAGS@
152 GTK_LIBS = @GTK_LIBS@
153 INSTALL = @INSTALL@
154 INSTALL_DATA = @INSTALL_DATA@
155 INSTALL_PROGRAM = @INSTALL_PROGRAM@
156 INSTALL_SCRIPT = @INSTALL_SCRIPT@
157 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
158 INSTOBJEXT = @INSTOBJEXT@
159 INTLLIBS = @INTLLIBS@
160 INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@
161 INTLTOOL_MERGE = @INTLTOOL_MERGE@
162 INTLTOOL_PERL = @INTLTOOL_PERL@
163 INTLTOOL_UPDATE = @INTLTOOL_UPDATE@
164 LDFLAGS = @LDFLAGS@
165 LIBOBJS = @LIBOBJS@
166 LIBS = @LIBS@
167 LTLIBOBJS = @LTLIBOBJS@
168 MAINT = @MAINT@
169 MAKEINFO = @MAKEINFO@
170 MKDIR_P = @MKDIR_P@
171 MKINSTALLDIRS = @MKINSTALLDIRS@
172 MSGFMT = @MSGFMT@
173 MSGFMT_OPTS = @MSGFMT_OPTS@
174 MSGMERGE = @MSGMERGE@
175 OBJEXT = @OBJEXT@
176 PACKAGE = @PACKAGE@
177 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
178 PACKAGE_NAME = @PACKAGE_NAME@
179 PACKAGE_STRING = @PACKAGE_STRING@
180 PACKAGE_TARNAME = @PACKAGE_TARNAME@
181 PACKAGE_URL = @PACKAGE_URL@
182 PACKAGE_VERSION = @PACKAGE_VERSION@
183 PATH_SEPARATOR = @PATH_SEPARATOR@
184 PKG_CONFIG = @PKG_CONFIG@
185 PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
186 PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
187 POFILES = @POFILES@
188 POSUB = @POSUB@
189 PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@
190 PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@
191 SET_MAKE = @SET_MAKE@
192 SHELL = @SHELL@
193 STRIP = @STRIP@
194 USE_NLS = @USE_NLS@
195 VERSION = @VERSION@
196 XGETTEXT = @XGETTEXT@
197 XLIB_CFLAGS = @XLIB_CFLAGS@
198 XLIB_LIBS = @XLIB_LIBS@
199 XMLCATALOG = @XMLCATALOG@
200 XML_CATALOG_FILE = @XML_CATALOG_FILE@
201 XSLTPROC = @XSLTPROC@
202 abs_builddir = @abs_builddir@
203 abs_srcdir = @abs_srcdir@
204 abs_top_builddir = @abs_top_builddir@
205 abs_top_srcdir = @abs_top_srcdir@
206 ac_ct_CC = @ac_ct_CC@
207 am__include = @am__include@
208 am__leading_dot = @am__leading_dot@
209 am__quote = @am__quote@
210 am__tar = @am__tar@
211 am__untar = @am__untar@
212 bindir = @bindir@
213 build_alias = @build_alias@
214 builddir = @builddir@
215 datadir = @datadir@
216 datarootdir = @datarootdir@
217 docdir = @docdir@
218 dvidir = @dvidir@
219 exec_prefix = @exec_prefix@
220 host_alias = @host_alias@
221 htmldir = @htmldir@
222 includedir = @includedir@
223 infodir = @infodir@
224 install_sh = @install_sh@
225 libdir = @libdir@
226 libexecdir = @libexecdir@
227 localedir = @localedir@
228 localstatedir = @localstatedir@
229 mandir = @mandir@
230 mkdir_p = @mkdir_p@
231 oldincludedir = @oldincludedir@
232 pdfdir = @pdfdir@
233 prefix = @prefix@
234 program_transform_name = @program_transform_name@
235 psdir = @psdir@
236 sbindir = @sbindir@
237 sharedstatedir = @sharedstatedir@
238 srcdir = @srcdir@
239 sysconfdir = @sysconfdir@
240 target_alias = @target_alias@
241 top_build_prefix = @top_build_prefix@
242 top_builddir = @top_builddir@
243 top_srcdir = @top_srcdir@
244 NULL =
245 SUBDIRS = \
246 ui \
247 $(NULL)
248
249 pkgconfigdir = $(libdir)/pkgconfig
250 pkgconfig_DATA = lxappearance.pc
251 desktopdir = $(datadir)/applications
252 desktop_in_files = \
253 lxappearance.desktop.in \
254 $(NULL)
255
256 desktop_DATA = $(desktop_in_files:.desktop.in=.desktop)
257 EXTRA_DIST = \
258 $(desktop_DATA) \
259 $(NULL)
260
261 all: all-recursive
262
263 .SUFFIXES:
264 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
265 @for dep in $?; do \
266 case '$(am__configure_deps)' in \
267 *$$dep*) \
268 ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
269 && { if test -f $@; then exit 0; else break; fi; }; \
270 exit 1;; \
271 esac; \
272 done; \
273 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/Makefile'; \
274 $(am__cd) $(top_srcdir) && \
275 $(AUTOMAKE) --foreign data/Makefile
276 .PRECIOUS: Makefile
277 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
278 @case '$?' in \
279 *config.status*) \
280 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
281 *) \
282 echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
283 cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
284 esac;
285
286 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
287 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
288
289 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
290 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
291 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
292 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
293 $(am__aclocal_m4_deps):
294 lxappearance.pc: $(top_builddir)/config.status $(srcdir)/lxappearance.pc.in
295 cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
296 install-desktopDATA: $(desktop_DATA)
297 @$(NORMAL_INSTALL)
298 test -z "$(desktopdir)" || $(MKDIR_P) "$(DESTDIR)$(desktopdir)"
299 @list='$(desktop_DATA)'; test -n "$(desktopdir)" || list=; \
300 for p in $$list; do \
301 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
302 echo "$$d$$p"; \
303 done | $(am__base_list) | \
304 while read files; do \
305 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(desktopdir)'"; \
306 $(INSTALL_DATA) $$files "$(DESTDIR)$(desktopdir)" || exit $$?; \
307 done
308
309 uninstall-desktopDATA:
310 @$(NORMAL_UNINSTALL)
311 @list='$(desktop_DATA)'; test -n "$(desktopdir)" || list=; \
312 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
313 test -n "$$files" || exit 0; \
314 echo " ( cd '$(DESTDIR)$(desktopdir)' && rm -f" $$files ")"; \
315 cd "$(DESTDIR)$(desktopdir)" && rm -f $$files
316 install-pkgconfigDATA: $(pkgconfig_DATA)
317 @$(NORMAL_INSTALL)
318 test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
319 @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
320 for p in $$list; do \
321 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
322 echo "$$d$$p"; \
323 done | $(am__base_list) | \
324 while read files; do \
325 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
326 $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
327 done
328
329 uninstall-pkgconfigDATA:
330 @$(NORMAL_UNINSTALL)
331 @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
332 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
333 test -n "$$files" || exit 0; \
334 echo " ( cd '$(DESTDIR)$(pkgconfigdir)' && rm -f" $$files ")"; \
335 cd "$(DESTDIR)$(pkgconfigdir)" && rm -f $$files
336
337 # This directory's subdirectories are mostly independent; you can cd
338 # into them and run `make' without going through this Makefile.
339 # To change the values of `make' variables: instead of editing Makefiles,
340 # (1) if the variable is set in `config.status', edit `config.status'
341 # (which will cause the Makefiles to be regenerated when you run `make');
342 # (2) otherwise, pass the desired values on the `make' command line.
343 $(RECURSIVE_TARGETS):
344 @fail= failcom='exit 1'; \
345 for f in x $$MAKEFLAGS; do \
346 case $$f in \
347 *=* | --[!k]*);; \
348 *k*) failcom='fail=yes';; \
349 esac; \
350 done; \
351 dot_seen=no; \
352 target=`echo $@ | sed s/-recursive//`; \
353 list='$(SUBDIRS)'; for subdir in $$list; do \
354 echo "Making $$target in $$subdir"; \
355 if test "$$subdir" = "."; then \
356 dot_seen=yes; \
357 local_target="$$target-am"; \
358 else \
359 local_target="$$target"; \
360 fi; \
361 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
362 || eval $$failcom; \
363 done; \
364 if test "$$dot_seen" = "no"; then \
365 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
366 fi; test -z "$$fail"
367
368 $(RECURSIVE_CLEAN_TARGETS):
369 @fail= failcom='exit 1'; \
370 for f in x $$MAKEFLAGS; do \
371 case $$f in \
372 *=* | --[!k]*);; \
373 *k*) failcom='fail=yes';; \
374 esac; \
375 done; \
376 dot_seen=no; \
377 case "$@" in \
378 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
379 *) list='$(SUBDIRS)' ;; \
380 esac; \
381 rev=''; for subdir in $$list; do \
382 if test "$$subdir" = "."; then :; else \
383 rev="$$subdir $$rev"; \
384 fi; \
385 done; \
386 rev="$$rev ."; \
387 target=`echo $@ | sed s/-recursive//`; \
388 for subdir in $$rev; do \
389 echo "Making $$target in $$subdir"; \
390 if test "$$subdir" = "."; then \
391 local_target="$$target-am"; \
392 else \
393 local_target="$$target"; \
394 fi; \
395 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
396 || eval $$failcom; \
397 done && test -z "$$fail"
398 tags-recursive:
399 list='$(SUBDIRS)'; for subdir in $$list; do \
400 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
401 done
402 ctags-recursive:
403 list='$(SUBDIRS)'; for subdir in $$list; do \
404 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
405 done
406
407 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
408 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
409 unique=`for i in $$list; do \
410 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
411 done | \
412 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
413 END { if (nonempty) { for (i in files) print i; }; }'`; \
414 mkid -fID $$unique
415 tags: TAGS
416
417 TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
418 $(TAGS_FILES) $(LISP)
419 set x; \
420 here=`pwd`; \
421 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
422 include_option=--etags-include; \
423 empty_fix=.; \
424 else \
425 include_option=--include; \
426 empty_fix=; \
427 fi; \
428 list='$(SUBDIRS)'; for subdir in $$list; do \
429 if test "$$subdir" = .; then :; else \
430 test ! -f $$subdir/TAGS || \
431 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
432 fi; \
433 done; \
434 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
435 unique=`for i in $$list; do \
436 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
437 done | \
438 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
439 END { if (nonempty) { for (i in files) print i; }; }'`; \
440 shift; \
441 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
442 test -n "$$unique" || unique=$$empty_fix; \
443 if test $$# -gt 0; then \
444 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
445 "$$@" $$unique; \
446 else \
447 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
448 $$unique; \
449 fi; \
450 fi
451 ctags: CTAGS
452 CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
453 $(TAGS_FILES) $(LISP)
454 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
455 unique=`for i in $$list; do \
456 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
457 done | \
458 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
459 END { if (nonempty) { for (i in files) print i; }; }'`; \
460 test -z "$(CTAGS_ARGS)$$unique" \
461 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
462 $$unique
463
464 GTAGS:
465 here=`$(am__cd) $(top_builddir) && pwd` \
466 && $(am__cd) $(top_srcdir) \
467 && gtags -i $(GTAGS_ARGS) "$$here"
468
469 distclean-tags:
470 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
471
472 distdir: $(DISTFILES)
473 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
474 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
475 list='$(DISTFILES)'; \
476 dist_files=`for file in $$list; do echo $$file; done | \
477 sed -e "s|^$$srcdirstrip/||;t" \
478 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
479 case $$dist_files in \
480 */*) $(MKDIR_P) `echo "$$dist_files" | \
481 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
482 sort -u` ;; \
483 esac; \
484 for file in $$dist_files; do \
485 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
486 if test -d $$d/$$file; then \
487 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
488 if test -d "$(distdir)/$$file"; then \
489 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
490 fi; \
491 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
492 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
493 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
494 fi; \
495 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
496 else \
497 test -f "$(distdir)/$$file" \
498 || cp -p $$d/$$file "$(distdir)/$$file" \
499 || exit 1; \
500 fi; \
501 done
502 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
503 if test "$$subdir" = .; then :; else \
504 test -d "$(distdir)/$$subdir" \
505 || $(MKDIR_P) "$(distdir)/$$subdir" \
506 || exit 1; \
507 fi; \
508 done
509 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
510 if test "$$subdir" = .; then :; else \
511 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
512 $(am__relativize); \
513 new_distdir=$$reldir; \
514 dir1=$$subdir; dir2="$(top_distdir)"; \
515 $(am__relativize); \
516 new_top_distdir=$$reldir; \
517 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
518 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
519 ($(am__cd) $$subdir && \
520 $(MAKE) $(AM_MAKEFLAGS) \
521 top_distdir="$$new_top_distdir" \
522 distdir="$$new_distdir" \
523 am__remove_distdir=: \
524 am__skip_length_check=: \
525 am__skip_mode_fix=: \
526 distdir) \
527 || exit 1; \
528 fi; \
529 done
530 check-am: all-am
531 check: check-recursive
532 all-am: Makefile $(DATA)
533 installdirs: installdirs-recursive
534 installdirs-am:
535 for dir in "$(DESTDIR)$(desktopdir)" "$(DESTDIR)$(pkgconfigdir)"; do \
536 test -z "$$dir" || $(MKDIR_P) "$$dir"; \
537 done
538 install: install-recursive
539 install-exec: install-exec-recursive
540 install-data: install-data-recursive
541 uninstall: uninstall-recursive
542
543 install-am: all-am
544 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
545
546 installcheck: installcheck-recursive
547 install-strip:
548 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
549 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
550 `test -z '$(STRIP)' || \
551 echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
552 mostlyclean-generic:
553
554 clean-generic:
555
556 distclean-generic:
557 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
558 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
559
560 maintainer-clean-generic:
561 @echo "This command is intended for maintainers to use"
562 @echo "it deletes files that may require special tools to rebuild."
563 clean: clean-recursive
564
565 clean-am: clean-generic mostlyclean-am
566
567 distclean: distclean-recursive
568 -rm -f Makefile
569 distclean-am: clean-am distclean-generic distclean-tags
570
571 dvi: dvi-recursive
572
573 dvi-am:
574
575 html: html-recursive
576
577 html-am:
578
579 info: info-recursive
580
581 info-am:
582
583 install-data-am: install-desktopDATA install-pkgconfigDATA
584
585 install-dvi: install-dvi-recursive
586
587 install-dvi-am:
588
589 install-exec-am:
590
591 install-html: install-html-recursive
592
593 install-html-am:
594
595 install-info: install-info-recursive
596
597 install-info-am:
598
599 install-man:
600
601 install-pdf: install-pdf-recursive
602
603 install-pdf-am:
604
605 install-ps: install-ps-recursive
606
607 install-ps-am:
608
609 installcheck-am:
610
611 maintainer-clean: maintainer-clean-recursive
612 -rm -f Makefile
613 maintainer-clean-am: distclean-am maintainer-clean-generic
614
615 mostlyclean: mostlyclean-recursive
616
617 mostlyclean-am: mostlyclean-generic
618
619 pdf: pdf-recursive
620
621 pdf-am:
622
623 ps: ps-recursive
624
625 ps-am:
626
627 uninstall-am: uninstall-desktopDATA uninstall-pkgconfigDATA
628
629 .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
630 install-am install-strip tags-recursive
631
632 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
633 all all-am check check-am clean clean-generic ctags \
634 ctags-recursive distclean distclean-generic distclean-tags \
635 distdir dvi dvi-am html html-am info info-am install \
636 install-am install-data install-data-am install-desktopDATA \
637 install-dvi install-dvi-am install-exec install-exec-am \
638 install-html install-html-am install-info install-info-am \
639 install-man install-pdf install-pdf-am install-pkgconfigDATA \
640 install-ps install-ps-am install-strip installcheck \
641 installcheck-am installdirs installdirs-am maintainer-clean \
642 maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
643 pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
644 uninstall-desktopDATA uninstall-pkgconfigDATA
645
646 @INTLTOOL_DESKTOP_RULE@
647
648 # Tell versions [3.59,3.63) of GNU make to not export all variables.
649 # Otherwise a system limit (for SysV at least) may be exceeded.
650 .NOEXPORT: