Merging upstream version 0.5.0.
[debian/lxappearance.git] / data / Makefile.in
CommitLineData
1469f737
DB
1# Makefile.in generated by automake 1.11.1 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
6# Inc.
7# This Makefile.in is free software; the Free Software Foundation
8# gives unlimited permission to copy and/or distribute it,
9# with or without modifications, as long as this notice is preserved.
10
11# This program is distributed in the hope that it will be useful,
12# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
14# PARTICULAR PURPOSE.
15
16@SET_MAKE@
17
18VPATH = @srcdir@
19pkgdatadir = $(datadir)/@PACKAGE@
20pkgincludedir = $(includedir)/@PACKAGE@
21pkglibdir = $(libdir)/@PACKAGE@
22pkglibexecdir = $(libexecdir)/@PACKAGE@
23am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
24install_sh_DATA = $(install_sh) -c -m 644
25install_sh_PROGRAM = $(install_sh) -c
26install_sh_SCRIPT = $(install_sh) -c
27INSTALL_HEADER = $(INSTALL_DATA)
28transform = $(program_transform_name)
29NORMAL_INSTALL = :
30PRE_INSTALL = :
31POST_INSTALL = :
32NORMAL_UNINSTALL = :
33PRE_UNINSTALL = :
34POST_UNINSTALL = :
35subdir = data
36DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
37 $(srcdir)/lxappearance.pc.in
38ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
39am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
40 $(top_srcdir)/configure.ac
41am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
42 $(ACLOCAL_M4)
43mkinstalldirs = $(install_sh) -d
44CONFIG_HEADER = $(top_builddir)/config.h
45CONFIG_CLEAN_FILES = lxappearance.pc
46CONFIG_CLEAN_VPATH_FILES =
47SOURCES =
48DIST_SOURCES =
49RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
50 html-recursive info-recursive install-data-recursive \
51 install-dvi-recursive install-exec-recursive \
52 install-html-recursive install-info-recursive \
53 install-pdf-recursive install-ps-recursive install-recursive \
54 installcheck-recursive installdirs-recursive pdf-recursive \
55 ps-recursive uninstall-recursive
56am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
57am__vpath_adj = case $$p in \
58 $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
59 *) f=$$p;; \
60 esac;
61am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
62am__install_max = 40
63am__nobase_strip_setup = \
64 srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
65am__nobase_strip = \
66 for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
67am__nobase_list = $(am__nobase_strip_setup); \
68 for p in $$list; do echo "$$p $$p"; done | \
69 sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
70 $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
71 if (++n[$$2] == $(am__install_max)) \
72 { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
73 END { for (dir in files) print dir, files[dir] }'
74am__base_list = \
75 sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
76 sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
77am__installdirs = "$(DESTDIR)$(desktopdir)" \
78 "$(DESTDIR)$(pkgconfigdir)"
79DATA = $(desktop_DATA) $(pkgconfig_DATA)
80RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
81 distclean-recursive maintainer-clean-recursive
82AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
83 $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
84 distdir
85ETAGS = etags
86CTAGS = ctags
87DIST_SUBDIRS = $(SUBDIRS)
88DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
89am__relativize = \
90 dir0=`pwd`; \
91 sed_first='s,^\([^/]*\)/.*$$,\1,'; \
92 sed_rest='s,^[^/]*/*,,'; \
93 sed_last='s,^.*/\([^/]*\)$$,\1,'; \
94 sed_butlast='s,/*[^/]*$$,,'; \
95 while test -n "$$dir1"; do \
96 first=`echo "$$dir1" | sed -e "$$sed_first"`; \
97 if test "$$first" != "."; then \
98 if test "$$first" = ".."; then \
99 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
100 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
101 else \
102 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
103 if test "$$first2" = "$$first"; then \
104 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
105 else \
106 dir2="../$$dir2"; \
107 fi; \
108 dir0="$$dir0"/"$$first"; \
109 fi; \
110 fi; \
111 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
112 done; \
113 reldir="$$dir2"
114ACLOCAL = @ACLOCAL@
115ALL_LINGUAS = @ALL_LINGUAS@
116AMTAR = @AMTAR@
117AUTOCONF = @AUTOCONF@
118AUTOHEADER = @AUTOHEADER@
119AUTOMAKE = @AUTOMAKE@
120AWK = @AWK@
121CATALOGS = @CATALOGS@
122CATOBJEXT = @CATOBJEXT@
123CC = @CC@
124CCDEPMODE = @CCDEPMODE@
125CFLAGS = @CFLAGS@
126CPP = @CPP@
127CPPFLAGS = @CPPFLAGS@
128CYGPATH_W = @CYGPATH_W@
129DATADIRNAME = @DATADIRNAME@
130DEFS = @DEFS@
131DEPDIR = @DEPDIR@
132ECHO_C = @ECHO_C@
133ECHO_N = @ECHO_N@
134ECHO_T = @ECHO_T@
135EGREP = @EGREP@
136EXEEXT = @EXEEXT@
137GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
138GMODULE_CFLAGS = @GMODULE_CFLAGS@
139GMODULE_LIBS = @GMODULE_LIBS@
140GMOFILES = @GMOFILES@
141GMSGFMT = @GMSGFMT@
142GREP = @GREP@
143GTK_CFLAGS = @GTK_CFLAGS@
144GTK_LIBS = @GTK_LIBS@
145INSTALL = @INSTALL@
146INSTALL_DATA = @INSTALL_DATA@
147INSTALL_PROGRAM = @INSTALL_PROGRAM@
148INSTALL_SCRIPT = @INSTALL_SCRIPT@
149INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
150INSTOBJEXT = @INSTOBJEXT@
151INTLLIBS = @INTLLIBS@
152INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@
153INTLTOOL_MERGE = @INTLTOOL_MERGE@
154INTLTOOL_PERL = @INTLTOOL_PERL@
155INTLTOOL_UPDATE = @INTLTOOL_UPDATE@
156LDFLAGS = @LDFLAGS@
157LIBOBJS = @LIBOBJS@
158LIBS = @LIBS@
159LTLIBOBJS = @LTLIBOBJS@
160MAKEINFO = @MAKEINFO@
161MKDIR_P = @MKDIR_P@
162MKINSTALLDIRS = @MKINSTALLDIRS@
163MSGFMT = @MSGFMT@
164MSGFMT_OPTS = @MSGFMT_OPTS@
165MSGMERGE = @MSGMERGE@
166OBJEXT = @OBJEXT@
167PACKAGE = @PACKAGE@
168PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
169PACKAGE_NAME = @PACKAGE_NAME@
170PACKAGE_STRING = @PACKAGE_STRING@
171PACKAGE_TARNAME = @PACKAGE_TARNAME@
172PACKAGE_URL = @PACKAGE_URL@
173PACKAGE_VERSION = @PACKAGE_VERSION@
174PATH_SEPARATOR = @PATH_SEPARATOR@
175PKG_CONFIG = @PKG_CONFIG@
176POFILES = @POFILES@
177POSUB = @POSUB@
178PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@
179PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@
180SET_MAKE = @SET_MAKE@
181SHELL = @SHELL@
182STRIP = @STRIP@
183USE_NLS = @USE_NLS@
184VERSION = @VERSION@
185XGETTEXT = @XGETTEXT@
186XLIB_CFLAGS = @XLIB_CFLAGS@
187XLIB_LIBS = @XLIB_LIBS@
188abs_builddir = @abs_builddir@
189abs_srcdir = @abs_srcdir@
190abs_top_builddir = @abs_top_builddir@
191abs_top_srcdir = @abs_top_srcdir@
192ac_ct_CC = @ac_ct_CC@
193am__include = @am__include@
194am__leading_dot = @am__leading_dot@
195am__quote = @am__quote@
196am__tar = @am__tar@
197am__untar = @am__untar@
198bindir = @bindir@
199build_alias = @build_alias@
200builddir = @builddir@
201datadir = @datadir@
202datarootdir = @datarootdir@
203docdir = @docdir@
204dvidir = @dvidir@
205exec_prefix = @exec_prefix@
206host_alias = @host_alias@
207htmldir = @htmldir@
208includedir = @includedir@
209infodir = @infodir@
210install_sh = @install_sh@
211libdir = @libdir@
212libexecdir = @libexecdir@
213localedir = @localedir@
214localstatedir = @localstatedir@
215mandir = @mandir@
216mkdir_p = @mkdir_p@
217oldincludedir = @oldincludedir@
218pdfdir = @pdfdir@
219prefix = @prefix@
220program_transform_name = @program_transform_name@
221psdir = @psdir@
222sbindir = @sbindir@
223sharedstatedir = @sharedstatedir@
224srcdir = @srcdir@
225sysconfdir = @sysconfdir@
226target_alias = @target_alias@
227top_build_prefix = @top_build_prefix@
228top_builddir = @top_builddir@
229top_srcdir = @top_srcdir@
230NULL =
231SUBDIRS = \
232 ui \
233 $(NULL)
234
235pkgconfigdir = $(libdir)/pkgconfig
236pkgconfig_DATA = lxappearance.pc
237desktopdir = $(datadir)/applications
238desktop_in_files = \
239 lxappearance.desktop.in \
240 $(NULL)
241
242desktop_DATA = $(desktop_in_files:.desktop.in=.desktop)
243EXTRA_DIST = \
244 $(desktop_DATA) \
245 $(NULL)
246
247all: all-recursive
248
249.SUFFIXES:
250$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
251 @for dep in $?; do \
252 case '$(am__configure_deps)' in \
253 *$$dep*) \
254 ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
255 && { if test -f $@; then exit 0; else break; fi; }; \
256 exit 1;; \
257 esac; \
258 done; \
259 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/Makefile'; \
260 $(am__cd) $(top_srcdir) && \
261 $(AUTOMAKE) --foreign data/Makefile
262.PRECIOUS: Makefile
263Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
264 @case '$?' in \
265 *config.status*) \
266 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
267 *) \
268 echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
269 cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
270 esac;
271
272$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
273 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
274
275$(top_srcdir)/configure: $(am__configure_deps)
276 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
277$(ACLOCAL_M4): $(am__aclocal_m4_deps)
278 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
279$(am__aclocal_m4_deps):
280lxappearance.pc: $(top_builddir)/config.status $(srcdir)/lxappearance.pc.in
281 cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
282install-desktopDATA: $(desktop_DATA)
283 @$(NORMAL_INSTALL)
284 test -z "$(desktopdir)" || $(MKDIR_P) "$(DESTDIR)$(desktopdir)"
285 @list='$(desktop_DATA)'; test -n "$(desktopdir)" || list=; \
286 for p in $$list; do \
287 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
288 echo "$$d$$p"; \
289 done | $(am__base_list) | \
290 while read files; do \
291 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(desktopdir)'"; \
292 $(INSTALL_DATA) $$files "$(DESTDIR)$(desktopdir)" || exit $$?; \
293 done
294
295uninstall-desktopDATA:
296 @$(NORMAL_UNINSTALL)
297 @list='$(desktop_DATA)'; test -n "$(desktopdir)" || list=; \
298 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
299 test -n "$$files" || exit 0; \
300 echo " ( cd '$(DESTDIR)$(desktopdir)' && rm -f" $$files ")"; \
301 cd "$(DESTDIR)$(desktopdir)" && rm -f $$files
302install-pkgconfigDATA: $(pkgconfig_DATA)
303 @$(NORMAL_INSTALL)
304 test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
305 @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
306 for p in $$list; do \
307 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
308 echo "$$d$$p"; \
309 done | $(am__base_list) | \
310 while read files; do \
311 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
312 $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
313 done
314
315uninstall-pkgconfigDATA:
316 @$(NORMAL_UNINSTALL)
317 @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
318 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
319 test -n "$$files" || exit 0; \
320 echo " ( cd '$(DESTDIR)$(pkgconfigdir)' && rm -f" $$files ")"; \
321 cd "$(DESTDIR)$(pkgconfigdir)" && rm -f $$files
322
323# This directory's subdirectories are mostly independent; you can cd
324# into them and run `make' without going through this Makefile.
325# To change the values of `make' variables: instead of editing Makefiles,
326# (1) if the variable is set in `config.status', edit `config.status'
327# (which will cause the Makefiles to be regenerated when you run `make');
328# (2) otherwise, pass the desired values on the `make' command line.
329$(RECURSIVE_TARGETS):
330 @fail= failcom='exit 1'; \
331 for f in x $$MAKEFLAGS; do \
332 case $$f in \
333 *=* | --[!k]*);; \
334 *k*) failcom='fail=yes';; \
335 esac; \
336 done; \
337 dot_seen=no; \
338 target=`echo $@ | sed s/-recursive//`; \
339 list='$(SUBDIRS)'; for subdir in $$list; do \
340 echo "Making $$target in $$subdir"; \
341 if test "$$subdir" = "."; then \
342 dot_seen=yes; \
343 local_target="$$target-am"; \
344 else \
345 local_target="$$target"; \
346 fi; \
347 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
348 || eval $$failcom; \
349 done; \
350 if test "$$dot_seen" = "no"; then \
351 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
352 fi; test -z "$$fail"
353
354$(RECURSIVE_CLEAN_TARGETS):
355 @fail= failcom='exit 1'; \
356 for f in x $$MAKEFLAGS; do \
357 case $$f in \
358 *=* | --[!k]*);; \
359 *k*) failcom='fail=yes';; \
360 esac; \
361 done; \
362 dot_seen=no; \
363 case "$@" in \
364 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
365 *) list='$(SUBDIRS)' ;; \
366 esac; \
367 rev=''; for subdir in $$list; do \
368 if test "$$subdir" = "."; then :; else \
369 rev="$$subdir $$rev"; \
370 fi; \
371 done; \
372 rev="$$rev ."; \
373 target=`echo $@ | sed s/-recursive//`; \
374 for subdir in $$rev; do \
375 echo "Making $$target in $$subdir"; \
376 if test "$$subdir" = "."; then \
377 local_target="$$target-am"; \
378 else \
379 local_target="$$target"; \
380 fi; \
381 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
382 || eval $$failcom; \
383 done && test -z "$$fail"
384tags-recursive:
385 list='$(SUBDIRS)'; for subdir in $$list; do \
386 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
387 done
388ctags-recursive:
389 list='$(SUBDIRS)'; for subdir in $$list; do \
390 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
391 done
392
393ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
394 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
395 unique=`for i in $$list; do \
396 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
397 done | \
398 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
399 END { if (nonempty) { for (i in files) print i; }; }'`; \
400 mkid -fID $$unique
401tags: TAGS
402
403TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
404 $(TAGS_FILES) $(LISP)
405 set x; \
406 here=`pwd`; \
407 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
408 include_option=--etags-include; \
409 empty_fix=.; \
410 else \
411 include_option=--include; \
412 empty_fix=; \
413 fi; \
414 list='$(SUBDIRS)'; for subdir in $$list; do \
415 if test "$$subdir" = .; then :; else \
416 test ! -f $$subdir/TAGS || \
417 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
418 fi; \
419 done; \
420 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
421 unique=`for i in $$list; do \
422 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
423 done | \
424 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
425 END { if (nonempty) { for (i in files) print i; }; }'`; \
426 shift; \
427 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
428 test -n "$$unique" || unique=$$empty_fix; \
429 if test $$# -gt 0; then \
430 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
431 "$$@" $$unique; \
432 else \
433 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
434 $$unique; \
435 fi; \
436 fi
437ctags: CTAGS
438CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
439 $(TAGS_FILES) $(LISP)
440 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
441 unique=`for i in $$list; do \
442 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
443 done | \
444 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
445 END { if (nonempty) { for (i in files) print i; }; }'`; \
446 test -z "$(CTAGS_ARGS)$$unique" \
447 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
448 $$unique
449
450GTAGS:
451 here=`$(am__cd) $(top_builddir) && pwd` \
452 && $(am__cd) $(top_srcdir) \
453 && gtags -i $(GTAGS_ARGS) "$$here"
454
455distclean-tags:
456 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
457
458distdir: $(DISTFILES)
459 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
460 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
461 list='$(DISTFILES)'; \
462 dist_files=`for file in $$list; do echo $$file; done | \
463 sed -e "s|^$$srcdirstrip/||;t" \
464 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
465 case $$dist_files in \
466 */*) $(MKDIR_P) `echo "$$dist_files" | \
467 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
468 sort -u` ;; \
469 esac; \
470 for file in $$dist_files; do \
471 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
472 if test -d $$d/$$file; then \
473 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
474 if test -d "$(distdir)/$$file"; then \
475 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
476 fi; \
477 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
478 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
479 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
480 fi; \
481 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
482 else \
483 test -f "$(distdir)/$$file" \
484 || cp -p $$d/$$file "$(distdir)/$$file" \
485 || exit 1; \
486 fi; \
487 done
488 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
489 if test "$$subdir" = .; then :; else \
490 test -d "$(distdir)/$$subdir" \
491 || $(MKDIR_P) "$(distdir)/$$subdir" \
492 || exit 1; \
493 fi; \
494 done
495 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
496 if test "$$subdir" = .; then :; else \
497 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
498 $(am__relativize); \
499 new_distdir=$$reldir; \
500 dir1=$$subdir; dir2="$(top_distdir)"; \
501 $(am__relativize); \
502 new_top_distdir=$$reldir; \
503 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
504 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
505 ($(am__cd) $$subdir && \
506 $(MAKE) $(AM_MAKEFLAGS) \
507 top_distdir="$$new_top_distdir" \
508 distdir="$$new_distdir" \
509 am__remove_distdir=: \
510 am__skip_length_check=: \
511 am__skip_mode_fix=: \
512 distdir) \
513 || exit 1; \
514 fi; \
515 done
516check-am: all-am
517check: check-recursive
518all-am: Makefile $(DATA)
519installdirs: installdirs-recursive
520installdirs-am:
521 for dir in "$(DESTDIR)$(desktopdir)" "$(DESTDIR)$(pkgconfigdir)"; do \
522 test -z "$$dir" || $(MKDIR_P) "$$dir"; \
523 done
524install: install-recursive
525install-exec: install-exec-recursive
526install-data: install-data-recursive
527uninstall: uninstall-recursive
528
529install-am: all-am
530 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
531
532installcheck: installcheck-recursive
533install-strip:
534 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
535 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
536 `test -z '$(STRIP)' || \
537 echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
538mostlyclean-generic:
539
540clean-generic:
541
542distclean-generic:
543 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
544 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
545
546maintainer-clean-generic:
547 @echo "This command is intended for maintainers to use"
548 @echo "it deletes files that may require special tools to rebuild."
549clean: clean-recursive
550
551clean-am: clean-generic mostlyclean-am
552
553distclean: distclean-recursive
554 -rm -f Makefile
555distclean-am: clean-am distclean-generic distclean-tags
556
557dvi: dvi-recursive
558
559dvi-am:
560
561html: html-recursive
562
563html-am:
564
565info: info-recursive
566
567info-am:
568
569install-data-am: install-desktopDATA install-pkgconfigDATA
570
571install-dvi: install-dvi-recursive
572
573install-dvi-am:
574
575install-exec-am:
576
577install-html: install-html-recursive
578
579install-html-am:
580
581install-info: install-info-recursive
582
583install-info-am:
584
585install-man:
586
587install-pdf: install-pdf-recursive
588
589install-pdf-am:
590
591install-ps: install-ps-recursive
592
593install-ps-am:
594
595installcheck-am:
596
597maintainer-clean: maintainer-clean-recursive
598 -rm -f Makefile
599maintainer-clean-am: distclean-am maintainer-clean-generic
600
601mostlyclean: mostlyclean-recursive
602
603mostlyclean-am: mostlyclean-generic
604
605pdf: pdf-recursive
606
607pdf-am:
608
609ps: ps-recursive
610
611ps-am:
612
613uninstall-am: uninstall-desktopDATA uninstall-pkgconfigDATA
614
615.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
616 install-am install-strip tags-recursive
617
618.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
619 all all-am check check-am clean clean-generic ctags \
620 ctags-recursive distclean distclean-generic distclean-tags \
621 distdir dvi dvi-am html html-am info info-am install \
622 install-am install-data install-data-am install-desktopDATA \
623 install-dvi install-dvi-am install-exec install-exec-am \
624 install-html install-html-am install-info install-info-am \
625 install-man install-pdf install-pdf-am install-pkgconfigDATA \
626 install-ps install-ps-am install-strip installcheck \
627 installcheck-am installdirs installdirs-am maintainer-clean \
628 maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
629 pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
630 uninstall-desktopDATA uninstall-pkgconfigDATA
631
632@INTLTOOL_DESKTOP_RULE@
633
634# Tell versions [3.59,3.63) of GNU make to not export all variables.
635# Otherwise a system limit (for SysV at least) may be exceeded.
636.NOEXPORT: